1. The control system of the mining anchor rod tray hydraulic press has two working modes: manual and semi-automatic.
2. The hydraulic system adopts a two-way plug-in valve integrated system, which is reliable in action, has a long service life, small hydraulic impact, and reduces connecting pipes and leakage points.
3. The power system of the mining anchor rod tray hydraulic press is installed on the ground for easy maintenance and repair.
4. Equipped with an independent and movable control cabinet for easy operation.
5. Hydraulic press can limit pressure, stroke, positioning, and process action.
6. The fuselage is a three beam, four column, and four nut structure with sufficient strength and rigidity, and all three beams are high-strength cast iron parts;
7. The slider moves up and down guided by four columns, and in order to improve the wear resistance of the column surface, the guiding part of the column is surface quenched;
8. Equipped with PLC control, one click operation, convenient and fast;
9. The dimensions and spacing of the worktable and sliding block T-groove of the mining anchor rod tray hydraulic press shall be made according to standards or customized as needed.
At present, coal mining enterprises mostly use automated production lines to complete the processing of anchor rod trays. The 500 ton anchor rod tray automated production line consists of a 500 ton three beam four column hydraulic press, an automatic feeding machine, and a mold. The entire process does not require manual operation. The automatic feeding machine directly grabs the cut long strip board and sends it to the 500 ton three beam four column hydraulic press mold. The press completes cutting, punching, and molding in one press, and the push rod pushes out the pressed tray. Simple operation, high efficiency, high safety factor, and labor cost savings.